UNDER LAMINATE FLOOR HEATERS

« BACK TO INDEX »

KLH Under Laminate Elements

Under Laminate ElementsAPPLICATION

Ultra-thin KLH heating elements can be installed directly under laminate floors without the need for screed or adhesive. They can also be used with timber floors with a maximum thickness of 15mm*. A layer of Depron insulation placed below the KLH element will provide the necessary thermal insulation and sound deadening. In poorly insulated properties supplementary heating may be required.

SELECTION

Draw a plan of the floor identifying areas occupied by fixed furniture such as kitchen cabinets (heating elements should not be installed in these areas). Draw the heating elements side by side on to the plan leaving a minimum gap of 50mm between the wall and the edge of the heating element. Whenever possible, keep the elements ends fitted with the live and neutral cables along one wall. This should be the same wall on which the thermostat is mounted.

FEATURES
  • Two different widths are available with standard lengths up to 10m (elements can be reduced in length on site if necessary)
  • Non standard lengths are available on request
  • 4m 'live' and 'neutral' cables are fitted
  • A number of elements are used to fill the floor area and are connected in parallel
  • KDPT programmable thermostat with both room and floor sensor (must be ordered separately)

SPECIFICATIONS

KLH4 RANGE
(WIDTH 400mm overall, 330mm heated)
KLH5 RANGE
(WIDTH 530mm overall, 500mm heated)
List No. Length (m) Output (kW) List No. Length (m) Output (kW)
KLH4-010 1.0 0.04 KLH5-010 1.0 0.06
KLH4-015 1.5 0.06 KLH5-015 1.5 0.1
KLH4-020 2.0 0.09 KLH5-020 2.0 0.13
KLH4-025 2.5 0.11 KLH5-025 2.5 0.16
KLH4-030 3.0 0.13 KLH5-030 3.0 0.19
KLH4-035 3.5 0.15 KLH5-035 3.5 0.23
KLH4-040 4.0 0.17 KLH5-040 4.0 0.26
KLH4-045 4.5 0.19 KLH5-045 4.5 0.29
KLH4-050 5.0 0.21 KLH5-050 5.0 0.32
KLH4-055 5.5 0.23 KLH5-055 5.5 0.36
KLH4-060 6.0 0.26 KLH5-060 6.0 0.39
KLH4-065 6.5 0.28 KLH5-065 6.5 0.42
KLH4-070 7.0 0.3 KLH5-070 7.0 0.45
KLH4-075 7.5 0.32 KLH5-075 7.5 0.49
KLH4-080 8.0 0.34 KLH5-080 8.0 0.52
KLH4-085 8.5 0.36 KLH5-085 8.5 0.55
KLH4-090 9.0 0.39 KLH5-090 9.0 0.59
KLH4-095 9.5 0.41 KLH5-095 9.5 0.62
KLH4-100 10.0 0.43 KLH5-100 10.0 0.65

DEPRON INSULATION

List No. Dimensions (mm)
Long Wide Thick
KDEP 1200 800 6

CONTROLLER

List No. Range Rating
  KDPT +5°C to +30°C 15 amp

KDPT diagram

KDPT

* We recommend you consult your timber floor supplier to check compatibility with underfloor heating.